About Me 0110: apliance repair

Friday, July 20, 2012

Home Appliance Repair Tips That Will Help You Get The Ball Rolling

Repainting is an inexpensive way to modernize a dated appliance or to coordinate the colors of your appliances with your kitchen's color scheme. It is a relatively easy process. Here's how to use appliance paint to give your kitchen or laundry room appliances a new look.

1. Choose the right paint. Be sure to purchase appliance paint especially formulated to paint household appliances such as refrigerators, washing machines, microwaves, and dishwashers. These paints are not for use on or near surfaces that get hot, such as stove tops. For those surfaces, be sure to purchase a heat-resistant paint. Also there are specialty appliance paints for resurfacing the inside of a microwave.

Appliance paint comes in brush-on and spray-on versions. Spray-on paint is best if you are planning to repaint the entire appliance, while brush-on paint is preferable it you are touching up chips or dents.

At the same time you purchase your paint, buy any other equipment you will need such as spray paint applicators, brushes, tarps, masking tape. And don't forget safety equipment, such as gloves, masks and goggles. You can purchase appliance paint at most hardware or home improvement stores.

2. Read the instructions for the appliance paint you've chosen carefully before starting your project.

3. Unplug the appliance and move it to a well-ventilated area. A garage or outdoors is ideal, but if you have to paint the appliance indoors, be sure that it is in an area where you can open windows or doors. Wherever you plan to paint it, there should be plenty of room around the appliance so that you can move freely and easily access all surfaces. Place the appliance on a tarp or on newspaper to protect the floor.

4. Clean all appliance surfaces well with soap and water to remove dirt, grease and dust. If there is any rust on the surface, remove it and treat the area with a rust deterrent product. Be sure the appliance is completely dry before you start to paint.

5. Use masking tape to cover any parts of the appliance that you do not want to paint.

6. If you are using spray paint, apply the paint with a fluid, sweeping motion. You might start with a light mist of paint that barely covers the entire surface, followed by a second, even layer on top of this base. Let the paint dry thoroughly, then apply a second coat if desired.

If your appliance just needs a touch up not an entire facelift you can use appliance paint to cover scratches, chips or worn areas. The process is similar to painting the entire surface. Be sure to clean the area to be painted thoroughly, apply a thin layer of paint, let it dry thoroughly then paint again if necessary.

Sources:

www.wisegeek.com, What is Appliance Paint?

homeimprovement.lovetoknow.com, How to Use Appliance Paint - LoveToKnow HomeImprovement

Monday, July 16, 2012

Choosing The Right Time To Embark On Home Renovations

Several years ago I bought a new refrigerator. I ended up with a Sears Kenmore with the freezer on the bottom. While I like the layout of the refrigerator, I have been less than happy with Sears and their way of doing business. Here is my list of top 10 reasons not to buy an appliance from Sears.

#10) They charge a $50 delivery fee. I think it is over the top to charge a delivery fee on a high-ticket item such as this. Amazon waives their shipping fee on any purchase over $25, why should Sears charge $50 when I live right around the corner from them?

#9) Limited service/delivery days. Once you make your purchase, you want to have it immediately. But Sears only delivers or makes service calls on certain days of the week, depending upon where you live. Forgive me, but if I live right around the corner from your store, I shouldn't have to wait more than a couple of hours to have my product delivered. And if you live in a rural area, you can easily wait a week or more.

#8) Nine-hour service window. For either delivery or a service call, all Sears will give you is an nine-hour service window - as in the product will be delivered between 8AM and 5 PM. Who gives a nine-hour window anymore? Even the cable company no longer does this. I've got better things to do with my time than sit around with my thumb inserted rectally waiting for the time period in which Sears will grace me with its presence.

#7) Unprofessional delivery drivers. When they finally decided to deliver my refrigerator, they sent a damaged model. Now, I know these things happen. I don't expect perfection. But, I think it's criminal (notice a trend here?) that the Sears delivery people tried to talk me into keeping my damaged refrigerator, claiming that since the dent was in the back of the unit, no one would see it! Meanwhile, the dent was right where the processor was, meaning chances were good I would run into problems later on.

#6) Poorly trained representatives. When I finally did get a refrigerator that wasn't damaged, I was unable to get the ice machine hooked up because the setup man did not know how to connect my model. This is really unforgivable.

#5) Overpriced appliances. I needed a refrigerator as soon as possible, so I chose Sears because of its name brand and the proximity to my house. If I had the luxury of price-comparison shopping, there's no way I would have picked this brand. And the proximity turned out to be no bargain, either.

#4) Scores poorly in consumer satisfaction. According to consumer ratings on Yahoo, Sears scored just 2.5 stars out of 5 from 137 people across the country. This included numerous consumers who rated it just one star. My guess is they would have rated it lower if that was an option.

#3)$59 Service Fee. Your Sears appliance is going to break down and require service. Chances are, quite often. Sears recognized an opportunity to make money off of this fact and decided to charge a $59 service fee. This is on top of parts and labor and does not guarantee that they will even be able to fix the problem. If you are into price-gouging, Sears is the company to do it to you.

#2 Limited parts in truck.. OK, you've agreed to the outrageous service fee, you've been waiting all day for the service truck to arrive, the technician has diagnosed the problem… but your appliance still isn't fixed. Why? Because the part is not in the truck. And if there's no part, you have to go back on the list and wait for the next time service comes to your area and hope that they remember to put the part in the truck this time

#1) Countless Web sites devoted to poor service. It can't be a good sign when your product and service are so bad that ordinary people go out of their way to start up Web sites with the sole purpose of trashing your product. Put in the phrase "Sears Sucks" into Google and you come up with 430,000 hits. That's a lot of dissatisfied customers.

appliance repair boston |
sub zero refrigerator maintenance |
href="http://www.appliancerepairdixhillsnewyork.com" target="_blank">
appliance repair discounts and coupons |
target="_blank">
calabasas, viking, thermador, maytag appliance repair service in beverly hills |
calabasas, viking, thermador, maytag appliance repair service in beverly hills

|
suffolk county appliance repair and service in suffolk county |
calabasas, viking, thermador, maytag appliance repair service in beverly hills